Picture Control; Sleep Function - Daewoo DTB-21S7 Manual Instruction

PICTURE CONTROL

You can select three pictures settings, by using the remote control NORMAL button (A17) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
01 BBC1
NORMAL I
18:30

SLEEP FUNCTION

The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A4), you can enter one of the following settings :
OFF 20 min 40 min 60 min
FORMAT SELECTION
AUTO setting :
If picture format signalling data is
received, then the most appropriate
ZOOM format will be automatically
selected. In the absence of this data, the
default ZOOM format will be selected(see
page 13, ZOOM AUTO function under
FEATURES MENU).
Otherwise, the preferred mode of the user
can be forced by repeated pressing of the
remote control ZOOM button (A15):
01 BBC1
NORMAL II
18:30
80 min 100 min 120 min
The SLEEP time remaining (before TV turn-off ) can be seen again at any time by one
touch on the remote control SLEEP button (A4).
A second touch (while the status display is active) will modify the SLEEP time remaining.
The following picture formats are
available:
AUTO 14:9
01 BBC1
FAVOURITE
OFF
01 BBC1
STEREO
16:9 FULL SCREEN AUTO
18:30
Remaining time (minutes)
before TV set switches off
20
8