Setting The Program Recording - TruTech DW13CTT Instruction Manual

Setting the Program Recording

Here's an example of how to record a program broadcast on channel
26 from 8:00 PM to 9:00 PM Friday, 6th of February 1999, in EP
mode.
1. With the TV/VCR turned on, press the MENU button until
"Program" menu will be displayed.
2. Press the VOL
3. Press the CH
Press the CH
2/5(today) 6 - - 28
SUN Every MON - - Every SAT
4. Press the VOL
time to "8" with the
5. Press the VOL
time to "00" with the
6. Press the VOL
time to "9" with the
7. Press the VOL
time to "00" with the
8. Press the VOL
buttons.
9. Press the VOL
the CH buttons.
You select the tape speed "AT" mode, default mode is set to "SP".
If the tape remain not to be enough, change the recording tape
speed automatically "EP".
button, then the today's date(Feb.05) appears in Red.
buttons to set daily and weekly recording.
buttons to setting changes as follows:
1(next month) 2 - - 4(next month)
MON~FRI
button, then set the hour of the recording Start
CH buttons.
button, then set the minute of the recording Start
CH buttons.
button, then set the hour of the recording Stop
CH buttons.
button, then set the minute of the recording Stop
CH buttons.
button, then set the channel to "26" with the
button, then set the recording speed to "EP" with
Chapter 7 : Additional VCR Features
Every
SUN~SAT 5(today).
CH
35