Chapter 5 : Using Timer Functions; Setting The Clock Automatically - TruTech DW13CTT Instruction Manual

C H A P T E R 5
Using Timer Functions
Your TV/VCR has a built in-clock, and you can set the TV to turn on and
off at times that you select. You can also set your TV to turn off after
counting down a certain amount of time.

Setting the Clock Automatically

Your TV/VCR can automatically set its internal clock using a signal from
a local PBS station. If you complete the following procedure, and your
local PBS station is sending a time signal, then your TV/VCR will always
show the correct time.
1. With the TV turned on, press the MENU button until "Time" menu is
displayed.
2. The "Set Clock" item will be selected. Press the VOL
then "Auto" will be displayed in RED.
3. Press the CH buttons to display the "Auto Current Time Set" mode.
4. Use the CH
channel of the local PBS station, to set "Automatic"
5. Use the VOL
6. Press the
zone where you live. If you don't know the time zone where you live, to
set 'Automatic".
Press the
Automatic
Alaska Hawaii
Choose
Automatic
ON
OFF
7. Use the VOL
8. Press the
(See the table blow)
9. Press the
10. To activate the Automatic Clock setting, press the POWER button
to turn off your TV/VCR.
Leave the TV/VCR off for 4-5 minutes. When you turn the TV/VCR
back on, the automatic clock should be set.
24

Chapter 5 : Using Timer Functions

buttons to set the PBS channel. If you don't know the
button to select "Time Zone".
CH buttons to select that corresponds to the time
CH buttons to change the Time Zone.
Atlantic Eastern Central
Automatic
To
Select to set the daylight savings time automatically
Select if your area uses daylight savings time
Select if your area does not use daylight savings time
button to select 'DST" (Daylight Savings Time).
CH buttons to select DST "Automatic" "ON" "OFF".
MENU button to exit.
button twice,
Mountain Pacific