Changing Channels; Changing The Volume - TruTech DW13CTT Instruction Manual

Changing Channels

You can change channels in three ways:

Changing the Volume

14
Chapter 3 : Operating Your TV
1. The CH buttons will take you through all mem-
orized channels, one by one. The
will not access channels that have not been pro-
grammed into the TV's memory. For more infor-
mation about programming channels into memo-
ry, see the section Programming your TV/VCR's
Channel Memory on the previous page.
2. The number buttons (0-9) will take you to any
channel, even if it has not been memorized. To
change to a channel, enter its number; the
TV/VCR will tune to the new channel when you
enter the second digit of the channel.
3. The FAVORITE CH button will take you instantly to
the last channel you were watching.
1. To change the volume of the TV/VCR set, use
the VOL buttons on the remote or on the
front panel.
2. To quickly turn off the sound, press the MUTE
button on the remote. The MUTE will appear on
screen, colored green. To return the volume to
its previous level, press MUTE again.
CH buttons