Playing A Tape - TruTech DW13CTT Instruction Manual

Playing a Tape

1. To begin playing a tape, place it in the TV/VCR's cassette compart-
ment. If the erasure prevention tab has been removed, the tape will
begin playing automatically. If the erasure prevention tab is intact,
press the PLAY button on the front panel or on the remote control.
2. To pause the tape and display a still frame, press the PAUSE/STILL
button on the remote control.
3. To stop the tape, press the STOP/EJECT button on the front panel
or on the remote control.
Searching for a scene
If you are looking for
a particular scene,
you can use the FF
and REW buttons to
find the scene
faster.
1. Press the FF but-
ton during play-
back to search
quickly in the forward direction. Press the FF button a second time to
search at 7X normal(in SP speed) or 11X normal (in EP).
2. Press the REW button during playback to search quickly in the
reverse direction. Press the REW button a second time to search at
7X normal (in SP speed) or 11X normal (in EP.)
If you press FF or REW while the tape is stopped, the TV/VCR will quick-
ly wind your tape in the selected direction. No picture from the tape will
be displayed, but the tapes moves at a much higher speed without the
picture.
Chapter 4 : Operating Your VCR
19