Using the Counter (Zero Stop)
The VCR counter can be used to keep track of your position on the
tape. You can also use it to quickly return to a particular point on the
tape. The counter cannot be displayed unless there is a cassette tape
in the TV/VCR.
1. To display the counter, press the RECALL button until the counter is
displayed in the right hand corner.
2. To reset the counter, press the C-RESET button on the remote con-
trol (0:00:00). The counter is also reset when you put a new cassette
in your TV/VCR.
3. Press the MENU button until "Tape" menu will be displayed.
4. After play the tape, use the
If the press the VOL
5. The TV/VCR will rewind until it reaches the 0:00:00 mark on the
counter, then it will stop.
You can cancel the search for 0:00:00 by press the STOP button.
6. Press the C- STOP button on the remote control, you can quickly
return to the 0:00:00.
CH
buttons to select the "Zero stop".
button, you can quickly return to the 0:00:00.
Chapter 4 : Operating Your VCR
23