Table of Contents
Advertisement
Chapter 8
Note
s
ABOUT THE USE OF SCREWS
The screws to be used in the Basic Processing Unit are inch screws.
When installing option parts, make sure to use the relevant screws.
Furthermore, be careful because the screws to be used with the Basic Processing Unit are
different from those for installing a hard disk, a floppy disk drive or a 5.25 inch device.
When a screw is already attached to the option part, always use the screw that comes with
the device.
TRANSPORTING THE UNIT
When transporting the Basic Processing Unit, use the package box of the exclusive use.
When using another box, use some buffering material to defend it against the impact.
At least three persons are required to carry the server (Max 44kg).
Advertisement
Table of Contents
