If The System Is Unable To Make Backup Copies Of Nvram Information - NEC Express 120Mf Service Manual

If the System is Unable to Make Backup Copies of NVRAM Information

Set the NVRAM information on the new motherboard by taking the following steps.
a. Set the NEC EXPRESSBUILDER CD-ROM in the CD-ROM drive, and activate the
NEC EXPRESSBUILDER.
b. When the NEC EXPRESSBUILDER becomes active, activate the Offline Maintenance
utility by selecting "Tool" from the menu → "Offline Maintenance Utility" → "Manage
System Information."
c. When the Offline Maintenance utility becomes active, select "Menu for Maintenance
Persons" from the menu.
(Screen image)
Offline Maintenance Utility
Offline Maintenance Utility
Manage System Information
Execute the Offline Maintenance Utility
Set Remote Maintenance Information
Return to the Custom Setup Menu
Manage System Information
Save
Menu for Maintenance Persons
Exit
d. Do not care about a notice displayed, and press the Enter key. The system asks you to
enter the password. Enter the password as shown below.
Password >CENVRAM
e. Select "Update Product/Cabinet Information" when the following screen appears after
you enter the password:
Menu for Maintenance Persons
Restore (at replacement of the mother board)
Update Product/Cabinet Information
Return to the Previous Menu
f. The screen shown below appears. Move the cursor to "Set Default Values" and press the
Enter key.
6-9 Installing Optional Internal Devices
⇓