Table of Contents
Advertisement
6-14 Installing Optional Internal Devices
How to Attach the Motherboard
To attach the motherboard, follow the removal procedure in the reverse order. Be careful of the
following points.
a. Check cables, confirm that wires are not pressed, install all connectors, etc.
b. Do not bend the spring for EMI and a gasket.
c. Use clamps to connect cables after Motherboard is installed.
d. Follow the instructions below to attach a Heat Sink
The Retention module can be removed by using a minus driver or the removing clip tool.
1. Pull up the lever.
2. Install a processor.
Socket with dust cover (sponge) removed
Lever
3. Push the lever back down and fix a
processor.
Advertisement
Table of Contents
