Power Supply And Power Code Use - NEC Express 120Mf Service Manual

Power Supply and Power Code Use

Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to
f ollow this warning may cause an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. Failure to follow this warning
m ay cause a gas explosion.
Plug in to a proper power source.
Use a proper wall outlet. Use of an improper power source may cause a fire
or a power leak.
Do not install the NEC Express server where you need an extension cord.
Use of a cord that does not meet the power specifications of the NEC Express
s erver may heat up the cord and cause a fire.
Do not connect the power cord to an outlet that has an illegal number of
c onnections.
The electric current exceeding the rated flow overheats the outlet, which may
c ause a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect
contact) may cause a fire. Heat will also be generated if condensation is
formed on dusty blades of the halfway inserted plug, increasing the possibility
o f fire.
1-3 Notes on Using the Server
WARNING
CAUTION