Lamps And Touch Switches; Lamp And Touch Switch Display Status Response - Omron NT-series Operation Manual

    
Description
8-digit Number Input Notify
Format
Description
7-3-3

Lamps and Touch Switches

Notifying the Display Status The lit/flashing status of the lamps and touch switches which are set on the screen

Lamp and Touch Switch Display Status Response

Format
Description
Reference
A number with 4 transferred digits set with the NT600S number setting function is
reported to the Host with this command.
[ESC] F d
1



1B 46
n n
6 7





d d d : Numeral memory table address to which number was input (3-digit hex-
1 2 3
adecimal)
000 to 1FF
H
n n n n n n n n : Input number data (8-digit BCD)
1 2 3 4 5 6 7 8
A number with 8 transferred digits set with the PT number setting function is re-
ported to the Host with this command.
currently displayed on the NT600S is sent to the Host by executing the following
command.
[ESC]
1B
m : Display status
1
m
1
0 (30 )
H
1 (31 )
H
2 (32 )
H
n n n : Lamp or touch switch address (3-digit hexadecimal)
1 2 3
000 to 0FF (0 to 255)
H
The NT600S returns this command to report the lamp or touch switch number dis-
play status to the Host in response to the Lamp and Touch Switch Display Status
Enquiry Command (see 7-2-3 ) sent from the Host.
Lamps 0 to 111 are reported as being lit when in the "flashing inverse" status.
d d n
2 3 1









n [CR]
8



0D
S
m n
1 1







53
Display status
Not lit (normal display)
Lit
Flashing inverse
Section 6-3
n n n n
2 3 4 5







n n
2 3