Omron NT-series Operation Manual page 109

2     
Types of the Buzzer Sounds The following buzzer sounds can be set.
Reference
Setting the Buzzer

Continuous sound: The buzzer continues to sound.

Intermittent sound: The buzzer sounds intermittently at constant intervals.
If both the continuous buzzer and the intermittent buzzer are instructed by the
Host, the continuous buzzer will sound.
Use the memory switches to set whether or not the buzzer sounds when the buzz-
er sound has been instructed by the Host or with a screen attribute or when an
error has occurred.
The factory setting has been made at "ON" so that the buzzer will sound when a
command is received from the Host or when a screen attribute setting error has
occurred.
Set the buzzer sound by the menu operation from the System Menu as mentioned
below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Memory Init.
Memory Switches
[ MEMORY SWITCH MENU (1/2) ]
Comm. Method
Key Press Sound
Buzzer Sound
Putting-Out Time
Resume Function
Support T ool Mode
Select "Maintenance Mode".
Select "Memory Switches".
Display History
Repeatedly pressing the "Buzz-
er Sound" touch switch cycles
EXIT
through the setting options
Host Link
"ON", "ERR ON", and "OFF".
OFF
NEXT
OFF
PAGE
None
SAVE
ON
EXIT
NT600S
Section 3-8