Table of Contents
Advertisement
13-1291.fm Page 31 Wednesday, July 14, 1999 6:29 PM
USING THE CASSETTE DECK
The system has two cassette decks.
You can play tapes in TAPE 1, and
you can use TAPE 2 (RECORD/
PLAY) to play or record tapes.
Note: To control a tape, use the con-
trol buttons under the deck where you
loaded it.
LOADING AND PLAYING
A CASSETTE TAPE
Note: Before playing or recording any
cassette tape, take up any slack in the
tape by turning the cassette's hub with
a pencil. If you do not remove excess
slack, the tape could become tangled
in the record/playback mechanism.
(illus show tape with pencil
thru hub)
Follow these steps to load and play a
cassette tape in either deck.
1. If necessary, press
on the system.
2. Press
to select the tape
TAPE
function.
TAPE
system display.
to turn
POWER
appears on the
(illus)
3. Press
STOP/EJECT
compartment door opens.
(illus)
4. Insert the cassette tape into the
door's guides with its open edge
facing down, the side you want to
play facing you, and its full reel to
the left.
(illus)
5. Gently close the cassette com-
partment door.
6. Press
. The tape plays until it
PLAY
reaches the end of the side, then
it automatically stops.
(illus)
. The cassette
31
Advertisement
Table of Contents
