Displaying Information About Cds; Skip Play; Audible Search - Optimus System 744 Owner's Manual

13-1291.fm Page 22 Wednesday, July 14, 1999 6:29 PM
Displaying Information About
CDs
The elapsed time of the current track
(in minutes and seconds) automatical-
ly appears on the CD display as a CD
plays. To display additional informa-
tion about the current CD, repeatedly
press on the system or
TIME MODE
on the remote control. As you
TIME
press or
TIME MODE TIME
appears in the following order:
• Elapsed time of the entire CD (in
minutes and seconds)
• Remaining time for the current
track (in minutes and seconds)
• Remaining time for the entire CD
(in minutes and seconds)
Note: The elapsed time since the first
track started and the elapsed time
since the CD started might not be the
same. This is normal.

Skip Play

To skip backward or forward to a
track (while a CD is playing or
paused), repeatedly
or
SEARCH
the system or or
mote control until the desired track
number appears. The CD changer
skips to the selected track, then plays
it.
To skip to a track on another CD
(while a CD is playing or paused), re-
peatedly press
DISC SELECTOR
22
peatedly
tem or
control until the desired track number
appears. The CD changer skips to the
selected track on the selected CD,
then plays it.
Note: If you use skip play while a CD
is paused, the CD remains paused
, information
when the CD changer skips to the se-
lected track.

Audible Search

To search for a particular section of a
track (while a CD is playing or
paused), press and hold down
SEARCH
the system. The CD changer rapidly
plays the CD either backward or for-
ward (like reviewing or cueing a cas-
sette tape) and automatically re-
duces the CD's volume if the CD
was playing. When you hear the de-
sired section, release
tem to resume normal play.
press
SKIP/
Notes:
on
• You cannot use
on the re-
• If you use audible search while
or
to select the CD's number, then re-
press
SKIP/SEARCH
or
or on the remote
or
SKIP/SEARCH
or
the remote control to do audible
search.
a CD is paused, it remains
paused when you release
SEARCH
on the system.
on the sys-
SKIP/
on
on the sys-
or on
SKIP/
or