Table of Contents
Advertisement
13-1295.fm Page 15 Wednesday, July 14, 1999 7:10 PM
CASSETTE DECK OPERATION
The system has one cassette deck for
normal cassette tape playback and re-
cording.
The deck has a full-release auto-stop
system to protect tapes and prevent
pinch roller damage. When a tape
reaches the end of a side, the tape
mechanism automatically stops and
releases the tape.
LOADING A CASSETTE
TAPE
1. Take up any slack in the tape by
turning the cassette's hub with a
pencil. If you do not remove ex-
cess slack, the tape might be-
come
tangled
playback
mechanism.
touching the tape.
show pencil in cassette hub
2. Press
STOP/EJECT
the cassette compartment door.
show STOP/EJECT location
in
the
record/
Avoid
to open
3. Insert the cassette tape into the
tape guides in the compartment
door, with its exposed tape edge
facing down, the side you want to
play facing you, and its full reel to
the left.
4. Close the compartment door.
PLAYING A CASSETTE
TAPE
After loading a cassette tape, follow
these steps to play it.
1. Set
to
FUNCTION
TAPE
2. Press
. The tape plays un-
PLAY
til it reaches the end of the side,
then it automatically stops.
show PLAY location
Notes:
• To temporarily stop playback,
y
press
PAUSE
y
again to continue playback.
show PAUSE location
.
. Press
PAUSE
15
Advertisement
Table of Contents
