Disc Scan; Programmed Play; Programming And Playing A Sequence - Optimus System 744 Owner's Manual

13-1291.fm Page 25 Wednesday, July 14, 1999 6:29 PM
(Illus - show MUSIC SCAN key)
Notes:
• The play mode must be set to ALL
DISC or 1 DISC to use music
scan. See "Selecting and Playing
a CD" on Page 20.
• If you press
during normal play, music
M.SCAN
scan starts with the next track on
the CD.

Disc Scan

Press
DISC SCAN
play the first 10 seconds of the first
track on each loaded CD. The disc
number flashes. Press
again to stop disc scan.
(illus)
Notes:
• The play mode must be set to ALL
DISC or 1 DISC to use disc scan.
See "Selecting and Playing a CD"
on Page 20.
• If you press
DISC SCAN
normal play, disc scan starts from
the first track on the next CD.
or
MUSIC SCAN
on the system to
DISC SCAN
during

PROGRAMMED PLAY

You can program up to 50 selections
from all loaded CDs to play in any or-
der you choose.
Note: You can store a selection more
than once in a programmed se-
quence.
Programming and Playing a
Sequence
1. With play stopped, press
on the remote control.
and PROGRAM
appear on the CD display.
(illus)
2. Use the number keys on the
remote control to enter the disc
number for the CD that has the
tracks you want to program. Then,
within 4 seconds, press
the remote control.
Note: If the disc number you
entered disappears before you
press , repeat this step.
DISC
3. Within 4 seconds, enter the first
track number you want to pro-
gram. Then, within 4 seconds,
press on the remote con-
TRACK
trol.
PROG.
DISC 0
and 0P-01
on
DISC
25