Table of Contents
Advertisement
13-1291.fm Page 10 Wednesday, July 14, 1999 6:29 PM
CONNECTING AN
ADDITIONAL AUDIO
SOURCE
If you have a VCR or other equipment,
such as a camcorder or a TV that has
line-level audio outputs, you can play
the sound through your system. Use a
cable with two phono jacks to connect
the source's left and right audio output
jacks to the
VCR/AUX L
the back of the system.
(illus)
CONNECTING POWER
To connect power, after all other con-
nections are made, plug your system's
power cord into a standard AC outlet.
The STANDBY indicator (above the
button at the top of the system)
BAND
lights.
Caution: Your system's power cord
has a polarized plug (one blade is wid-
er than the other). If you have difficulty
inserting the plug into the outlet, do
not force it. Turn the plug over and try
again.
10
RESETTING THE CD
CHANGER
If the CD changer does not work prop-
erly, you might need to reset it by un-
plugging the system's power cord
from the AC outlet. Wait at least 10
seconds, then plug the power cord
back in.
Note: If you unplug the system, it
and
jacks on
R
saves all tuner memory settings for
about a week.
INSTALLING BATTERIES
IN THE REMOTE
CONTROL
The remote control requires two AAA
batteries (not supplied) for power. For
the best performance and longest life,
we recommend alkaline batteries,
such as RadioShack Cat. No. 23-555.
Caution: Always use fresh batteries
of the required size and type.
1. Remove the battery compartment
(illus)
cover by sliding it in the direction
of the arrow.
Advertisement
Table of Contents
