Using The Tuner; Manual Tuning - Optimus System 744 Owner's Manual

13-1291.fm Page 15 Wednesday, July 14, 1999 6:29 PM

USING THE TUNER

1. If necessary, press
2. Press . The currently se-
TUNER
lected band ( AM
frequency number, and
appears on the system dis-
kHz
play.
(illus)
3. Tune to AM or FM radio stations
using manual, automatic, or pre-
set tuning.
Notes:
• You can use the remote control to
tune preset stations. However,
you cannot use the remote control
to directly enter a radio station's
frequency number.
• When you turn on the system, it
tunes to the station that was play-
ing when you last turned off the
system.
• If appears on the system
AUTO
display and you receive an FM
broadcast in stereo,
appears.
• If FM stereo reception is noisy and
appears on the system dis-
AUTO
play, press
FM MODE
tem. AUTO
sound is no longer in stereo, but
.
POWER
, FM1 , or FM2 ),
or
MHz
STEREO also
on the sys-
disappears. The
the reception should improve. To
return to stereo, press
AUTO appears on the display.

MANUAL TUNING

Follow these steps to tune to both
strong and weak stations.
1. Repeatedly press
the desired band (
AM, FM1 or FM2 appears for FM).
(illus)
2. If AUTO TUNING
the system display, press
on the system.
MANU
disappears.
TUNING
(illus)
.
FM MODE
to select
BAND
AM appears for
appears on
AUTO/
AUTO
15