Table of Contents
Advertisement
3.
Slide the side bars downward to disengage the bars' inner tabs from the chassis, then detach the bars.
Removing the Front Bezel
1.
Perform the "Pre-disassembly Procedure" on page 25.
2.
Remove the side bars by following the procedure described on the previous section.
3.
Use a flat screwdriver to pry off the front bezel from the rear cover.
4.
Detach the front bezel from the rear cover and turn it over to access the webcam cable.
28
Packard Bell oneTwo M3600 AIO Computer Service Guide
Hide quick links:
Advertisement
Table of Contents
