Pella 818L0100 Installation Instructions Manual page 11

5
INSTALL THE fASTENERS fOR PERfORmANCE
UPgRADE OR HURRICANESHIELD PRODUCT
Frame Screw method:
Note: If installing with installation clips,
proceed to Step E.
A. Jambs:
out-swing: On the room side of the jamb;
drill and counter-sink 13/64" deep diameter
clearance holes through the door frame only
and not into the rough opening in the locations
shown. (See Out-Swing diagram in lower right).
In-swing: Open door panels; drill and counter-
sink 13/64" deep diameter clearance holes
through the door frame only and not into
the rough opening in the locations shown.
(On hinge jambs; clearance hole locations are
centered between hinges).
Hinge Jambs: See (5A) In-Swing
diagram (upper right). Fixed and
Lock jambs diagram for placement
of threshold screws and installation
clips (see out-swing diagram in
lower right).
B. Drill 13/64" deep clearance holes through the door frame head only and not into the rough
opening in the locations shown.
C.
Drill 1/8" x 1" deep pilot holes
framing in the head, jambs, and threshold of the unit frame.
Note: Be certain to shim between jambs and rough opening at all screw locations.
Out-Swing Vent and Fixed
Out-Swing Vent or Fixed
Screw
Location
EXTERIOR
INTERIOR
EXTERIOR
Fixed
Placement
Vent
Placement
INTERIOR
through the clearance holes and into the rough opening
Out-Swing Vent or Fixed
DIAGRAM FOR
PLACEMENT OF
FRAME SCREWS &
INSTALLATION CLIPS
In-Swing Vent
Screw
Location
In-Swing Vent
5A
Clearance
Hole
Location
Clearance
Hole
Location
Out-Swing
5A
Drill 13/64" clearance
holes through the frame.
In-Swing
Drill 13/64" clearance
holes through the frame.
5A
Out-Swing
DOUBLE OPERABLE
16" MAX
6"
O.C.
6"
In-Swing Vent
16"
MAX.
O.C.
5A
6"
16" MAX
6"
O.C.
In-Swing
6" 16" MAX O.C. 6" 6" 16" MAX O.C.
6" 16" MAX O.C. 6"
6" 16" MAX O.C.
In-Swing and Out-Swing
SINGLE FIXED OR OPERABLE
5B
6"
6"
16" MAX 16" MAX
6" 6"
O.C. O.C.
6"
16"
MAX.
O.C.
5A
6"
16" MAX 16" MAX
6"
6" 6"
6" O.C. O.C.
5E 5E
6"
Clearance
Hole
Location
Clearance
Hole
Location
6"
EXTERIOR
INTERIOR
EXTERIOR
Fixed
Placement
Vent
Placement
INTERIOR
5B
6"
6"
16"
MAX.
O.C.
5A
6"
6"