Installation; Connecting The Remote Controller - Samsung SCB-3020 User Manual

Introduction
❖
Rear
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE
1. L/L PULSE
2. Alarm_out
3. GND
4. Video out
5. GND
6. V+12V
Port for camera's fi rmware update. For further details, refer to the below table:
NO Port Name
1 L/L PULSE Clock port for LINE-LOCK control.
2 Alarm_out Alarm out port for motion detection.
3 GND Grounding Port.
This is connected to the Video Input Port of the monitor and it outputs
4 Video out
the Video signals.
5 GND Grounding Port.
6 V+12V Input port for DC 12 V power.
14 – High Resolution Compact ATM Camera
1. L/L PULSE 1. L/L Pulse
2. Alarm_out 2. Alarm out
3. GND 3. GND
4. Video out 4. Video out ou
5. GND 5. GND
6. V+12V 6. V+12V
Description

CONNECTING THE REMOTE CONTROLLER

To control the camera, a remote controller should be connected to.
POWER STATUS
POWER
OFF ON ADDRESS
(X)100
CABLE
COMPENSATION
S L
ON
1
TERMINATION
<CONTROLLER>
1. Connect the camera's video out port to the CONTROLLER's VIDEO IN.
2. Connect the CONTROLLER's VIDEO OUT port to a monitor's video in.
❖
You can use the menu as following :
- Press and hold [ENTER]: Moves to the main menu screen.
- Press [ENTER] briefl y: Used to confi rm the current settings.
- Four Direction Keys: Used to move the cursor up/down or left/right.

Installation

(X)10 (X)1
ON
2 1 2 3 4 5 6 7 8
PROTOCOL
REMOTE CONTROLLER SPC-300
15