Sanyo Xacti VPC-C1EX Instruction Manual page 151

3
Adjust the printer settings.
1 Toggle the SET button up or down
to select a printer setting
parameter, and press the SET
button.
d The screen to set the selected
parameter appears.
2 Toggle the SET button up or down
to adjust the setting, and press the
SET button.
d The selected parameter is set,
and you are returned to the
Printer Settings Screen.
d Follow the same procedure to
adjust the other parameters, as
desired.
d The contents of the settings that
can be made for each parameter
will differ depending on the
printer.
<When "PRINTER VALUE" is selected>
d The images will be printed
according to the settings
specified on the printer side.
4
Select "EXIT", and press the SET
button.
e You are returned to the Printing
Mode Screen.
Note
e The printer setting parameters will differ depending on the printer that is
connected.
e To use printer functions which do not appear on your camera's Printer
Settings Screen, select "PRINTER SETTINGS".
e If a function set by the camera is not available in the printer, the camera's
printer settings will automatically change to "PRINTER SETTINGS".
148
English