Sanyo Xacti VPC-C1EX Instruction Manual page 41

Turning on the camera when the power save
(sleep) function is active
In order to preserve battery pack power, the power save (sleep) function will
automatically turn off the camera after one minute of no use during shooting, or
five minutes of no use during playback (factory-preset setting).
e When the power save function is active, you can restore the power by any of
the following methods:
Move the main switch.
Press the ON/OFF button.
Press the MENU button.
Press the SET button.
e After the power save function has been active for about 1 hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
e When the AC adapter/charger is connected, the power save function will
become active about 10 minutes after the camera is turned on (factory-
preset setting).
e When the camera is connected to a computer or printer, it does not change
to the power save mode. In this case, the power save function becomes
active after about 12 hours.
e The user can specify the time elapsed before the power save function is
activated (page 119).
e When the camera is connected to a computer or printer, it does not change
to the power save mode. In this case, the power save function becomes
active after about 12 hours.
38
English