Sanyo VPC-CA9BK Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Camcorder
  5. VPC-CA9BK
  6. Service manual
Sanyo VPC-CA9BK Service Manual

Sanyo VPC-CA9BK Service Manual

Dual camera sanyo
Hide thumbs Also See for VPC-CA9BK:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Quick Manual
SERVICE MANUAL
CONTENTS
1. OUTLINE OF CIRCUIT DESCRIPTION .....................................3
2. DISASSEMBLY ........................................................................11
3. ELECTRICAL ADJUSTMENT ..................................................19
5. TROUBLESHOOTING GUIDE .................................................25
6. PARTS LIST .............................................................................26
RoHS
This product does not contain any hazardous substances prohibited by the
RoHS Directive.
WARNING
You are requested to use RoHS compliant parts for maintenance or repair.
You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow
the warning given on page 2 when carrying out repair work.)
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same of equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer's instruction.
Design and specifications are subject to change without notice.
NOTE: 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N.S.P. : Not available as service parts.
Design and specifications are subject to change without notice.
SG318/U, EX, GX, U2, EX2, GX2, U3, EX3, GX3, U4
FILE NO.
VPC-CA9BK
(Product Code : 168 177 02)
(U.S.A.)(Canada)(Taiwan)
VPC-CA9EXBK
(Product Code : 168 177 03)
(Europe)(U.K.)(South America)(China)
(Australia)(Hong Kong)(Russia)(Africa)
(Middle East)(Korea)(Taiwan) (General)
VPC-CA9GXBK
(Product Code : 168 177 04)
(South America)(China)(Australia)
(Hong Kong)(General)(Korea)(Taiwan)
VPC-CA9R
(Product Code : 168 177 06)
(U.S.A.)(Canada)(Taiwan)
VPC-CA9EXR
(Product Code : 168 177 07)
(Europe)(U.K.)(South America)(China)
(Australia)(Hong Kong)(Russia)(Africa)
(Middle East)(Korea)(Taiwan) (General)
VPC-CA9GXR
(Product Code : 168 177 08)
(South America)(China)(Australia)
(Hong Kong)(General)(Korea)(Taiwan)
VPC-CA9G
(Product Code : 168 177 10)
(U.S.A.)(Canada)(Taiwan)
VPC-CA9EXG
(Product Code : 168 177 11)
(Europe)(U.K.)(South America)(China)
(Australia)(Hong Kong)(Russia)(Africa)
(Middle East)(Korea)(Taiwan) (General)
VPC-CA9GXG
(Product Code : 168 177 12)
(South America)(China)(Australia)
(Hong Kong)(General)(Korea)(Taiwan)
VPC-CA9YL
(Product Code : 168 177 13)
(U.S.A.)(Canada)(Taiwan)
REFERENCE No.SM5310776

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VPC-CA9BK

Summary of Contents for Sanyo VPC-CA9BK

  • Page 1: Table Of Contents

    FILE NO. SERVICE MANUAL VPC-CA9BK (Product Code : 168 177 02) (U.S.A.)(Canada)(Taiwan) VPC-CA9EXBK (Product Code : 168 177 03) (Europe)(U.K.)(South America)(China) (Australia)(Hong Kong)(Russia)(Africa) (Middle East)(Korea)(Taiwan) (General) VPC-CA9GXBK (Product Code : 168 177 04) (South America)(China)(Australia) (Hong Kong)(General)(Korea)(Taiwan) VPC-CA9R (Product Code : 168 177 06) (U.S.A.)(Canada)(Taiwan)
  • Page 2 PRODUCT SAFETY NOTICE The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part designated in the Parts List.

  • Page 3: Outline Of Circuit Description

    1. OUTLINE OF CIRCUIT DESCRIPTION 1-1. CMOS CIRCUIT DESCRIPTION 1. IC Configuration The CMOS peripheral circuit block basically consists of the following ICs. IC911 (MT9J001I12STCV) CMOS imager CDS, AGC, ADC built-in H driver, V driver, serial communication circuit built-in 2. IC911 (CMOS) [Structure] The electric charges which are generated when each pixel is optically converted are in turn converted into signal voltages...
  • Page 4 1-2. CP1 and VF1 CIRCUIT DESCRIPTION 2. Outline of Operation When the shutter opens, the reset signals (ASIC and CPU) 1. Circuit Description and the serial signals (“take a picture” commands) from the 1-1. Digital clamp 8-bit microprocessor are input and operation starts. The optical black section of the image sensor extracts aver- When the TG/SG drives the image sensor, picture data passes aged values from the subsequent data to make the black...
  • Page 5 4. Lens drive block 5. Video Clip Recording and Playback 4-1. Focus drive 5-1. Recording The 16-bit serial data signals (LENS_SDI) and (LENS_SCLK The signals from the camera block are input to the ASIC where and LENS_EN) which are output from the ASIC (IC101) are they are processed, and the image data that is stored in the used to drive (FOCUS A +, FOCUS A -, FOCUS B + and FO- IC121 SDRAM converts MPEG4 encoded data inside the ASIC,...
  • Page 6 1-3. PWA POWER CIRCUIT DESCRIPTION 1. Outline 3. Motor System Power Output This is the main power circuit, and is comprised of the follow- BOOST 5 V is output. Feedback for the 5.0 V output is pro- ing blocks. vided to the switching controller (Pin (B7) of IC501) so that Switching controller (IC501) PWM control can be carried out.
  • Page 7 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and When FLCTL signal is input from the ASIC, the stroboscope the CHG signal from microprocessor becomes High (3.3 V), emits light.
  • Page 8 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
  • Page 9 PLLEN EV3X PLLEN LCD panel rotation detection (L= panel inversion) HINGE Card detection (L= detection) ZCARD AD INPUT OK NOT USED NOT USED ZBAT_OFF L: Interruption. From power supply watch IC SREQ L: Interruption. Correspondence from ASIC KEY_2ND L: InterruptKey. Key detection shutter ZUSBDET USB detection (L= detection) RESET...
  • Page 10 3. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V (power off: 2.4 V) voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scan- ning is carried out even when the power switch is turned off, so that the camera can start up again.

  • Page 11: Disassembly

    2. DISASSEMBLY Note: 1. When disassembling and reassembling the main unit, the LCD and the battery cover, always be sure to use the air leak tester (VJ8-0303) to test for air leaks and to check that the waterproof mechanism is functioning normally. Refer to the Instruction Manual provided with the air leak test tool for details on how to carry out the air leak test.
  • Page 12 2-1. REMOVAL OF CABI LEFT AND LENS When assembling, assemble order. When assembling, assemble order. When assembling, tighten the screws order. NOTE: Discharge a strobe capacitor with the discharge jig (VJ8-0188) for electric shock prevention. When assembling, assemble order.
  • Page 13 1. Screw 1.7 x 2.5 ASSY, FPC GASKET installing method (between steps 8 and 9 on page 12 and 13) 2. Screw 1.7 x 3.5 3. Cover joint base 4. Open the cover battery. 5. Screw 1.4 x 2.5 6. Five screws 1.7 x 5 approximately 7.
  • Page 14 Installing the gasket cabinet (step 13 on page 12) Install from directly above in the order of the numbers so that the gasket is not twisted. Lead wire of speaker dressing method (step 22 on page 12) Do not touch the solder.
  • Page 15 2-2. REMOVAL OF CP1 BOARD AND ST1 BOARD 31. Spring lock lever 1. Spacer flash 32. Lever batt lock 2. Spacer holder flash 3. Spacer lens unit 4. Spacer lens unit 2 5. Screw 1.7 x 4 6. Holder flash 7.
  • Page 16 2-3. REMOVAL OF LCD AND VF1 BOARD Installing the gasket LCD (step 36) When assembling, Install from directly above in the order of tighten the screws order. the numbers so that the FPC is not twisted. When assembling, tighten the screws order.
  • Page 17 1. Shaft cover batt 22. Earth LCD A 12. Holder LCD 30. Four screws 1.7 x 2.5 2. Spring cover batt 13. Screw 1.7 x 3.5 23. Holder joint R 31. FPC 3. Compl, cover batt 24. Holder joint L 14.
  • Page 18 2-4. BOARD LOCATION CA1 board VF1 board CP1 board ST1 board...

  • Page 19: Electrical Adjustment

    Download the calibration software and the firmware during use and after power off for a while. from the following URL. http://www.digital-sanyo.com/overseas/service/ 3. Computer screen during adjustment Place the DscCalDi.exe file, camapi32.dll file and QrCodeInfo.dll file together into a folder of your...
  • Page 20 3-6. The adjustment item which in necessary in part exchange CCD Black CCD White Point And Point Lens Factory White Point Language storage Reset Defect Defect Adjust- Cord Adjust- Setting information Setting Detect Detect Setting ment ment Adjustment registration Adjustment In Lighted COMPL PWB CP1 COMPL PWB VF1...
  • Page 21 Adjustment value determination Adjustment value determination is effectuated using the Dsc Calibration “STD_AFPOS”, “FOCUS”, “LENS_ERR”, “IRIS_GAIN” , “IRIS_OFFSET” values. If STD_AFPOS= sid_afpos Copy AWB Results: FOCUS= focus1, focus2, focus3, focus4 LENS_ERR= lens_error IRIS_GAIN= g WB=251,478,453 IRIS_OFFSET= o, the adjustment values fulfill the conditions CHECK=127,128,132 below, they are determined as within specifications.
  • Page 22 4. CCD Black Point And White Point Defect Detect 3-9. Factory Code Setting Adjustment In Lighted 1. Check the “Factory Code” display within the Setting group. 2. For U.S.A., Canada and NTSC general area If “FC_SANYO_U” does not appear, click on the “ “...
  • Page 23 3-13. Firmware uploading procedure 1. Uploading the firmware should be carried out if the version number (COMPL PWB XX-X) on the replacement circuit board is lower than the version of the distributed firmware. For XX-X, enter the name of the circuit board containing the firmware.

  • Page 24: Usb Storage Information Registration

    19.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: CA9 Serial: Rev. : 1.00 4.

  • Page 25: Troubleshooting Guide

    5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER PUSH THE POWER BUTTON SW FOR A WHILE HIGH IC301-24, 51 IC301-25 CHECK UNIT SW CHECK POWER SW KEY INPUT KEY_POWER INPUT IC501-D6, F6 (PON) IC301-9, 36, 59 CHECK IC101, IC301, IC504-4(PON2) CHECK IC302 (VDD)

  • Page 26: Parts List

    636 123 8748 REINFORCE PAD,A-SG318/J 645 099 2810 CABLE,DSC A/V(Dedicated AV interface cable) 7003 636 077 8139 CUSHION SHEET-SX774/KRO 645 093 9624 BATTERY CHARGER, VPC-CA9BK, 636 104 9337 LABEL CARTON GREEN-112EX3, VPC-CA9R,VPC-CA9G,VPC-CA9YL VPC-CA9G,VPC-CA9EXG,VPC-CA9GXG 645 098 8721 CORD,POWER-1.2MK,VPC-CA9EXBK, 636 094 2158...
  • Page 27 ACCESSORIES...
  • Page 28 636 125 8289 LABEL CAUTION-SG217/U 636 115 1030 COVER JOINT BASE-SG219/J3, 411 176 6909 SCR S-TPG PAN PCS 1.7X5.0 VPC-CA9BK,VPC-CA9EXBK,VPC-CA9GXBK 411 176 1003 SCR PAN PCS 1.7X2.5 636 123 8625 COVER JOINT BASE-SG318/J2, 411 215 5108 SCR S-TPG PAN PCS 1.7X5...
  • Page 29 CABINET AND CHASSIS PARTS 1 22 48 N.S.P.: Not available as service parts. Cabinet 1 SG318/J PARTS LIST 1...
  • Page 30 636 105 3402 SPACER ST1-SG114/J 645 099 4784 MAGNET,ND6X2.8X2.1 MARK 636 106 3708 SPACER HOLDER JOINT-SG114 636 127 6146 ASSY,COV LCD F SV-SG318, VPC-CA9BK, 636 109 7314 COMPL,GAS SCREW-SV-SG114 VPC-CA9EXBK,VPC-CA9GXBK,VPC-CA9YL 636 104 0129 LEVER BATT LOCK-SG114/J 636 127 6160 ASSY,COV LCD F SV-SG318, VPC-CA9R,...
  • Page 31 CABINET AND CHASSIS PARTS 2 Cabinet 2 SG318/J PARTS LIST 2(KTO)
  • Page 32 ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 33 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION C1206 303 346 2302 CERAMIC 0.1U K 10V C9508 303 340 2803 CERAMIC 2.2U K 10V C1207 303 343 4705 CERAMIC 0.1U K 10V C9510 303 358 8309 CERAMIC 1U K 10V C1208 303 343 4705 CERAMIC...
  • Page 34 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION R5023 301 261 9109 MT-FILM 12K DD 1/16W C1707 303 281 2405 CERAMIC 0.22U K 16V R5024 301 224 9504 MT-GLAZE 2.2K JA 1/16W C1708 303 281 2405 CERAMIC 0.22U K 16V R5031 301 261 2308 MT-FILM...

  • Page 35: Circuit Diagrams & Printed Wiring Boards

    CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING .............................C3 OVERALL CIRCUIT ............................C4 IMAGE SENSOR CIRCUIT ..........................C5 LENS CIRCUIT ..............................C5 MAIN CIRCUIT ..............................C6 POWER CIRCUIT ............................. C7 STROBE CIRCUIT .............................C7 SYSTEM CONTROL CIRCUIT ...........................C8 CIRCUIT DIAGRAMS CIRCUIT WAVEFORMS .............................C8 CP1 BOARD (DMA) MAIN ..........................
  • Page 36 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) 2. All capacitance values in "µF" unless otherwise noted. p=pico farad ; n=nano farad ; µ ,u or U=micro farad 3. All inductance values in "µH" unless otherwise noted. µ...

  • Page 37: Overall Wiring & Block Diagrams

    OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING BATTERY LENS UNIT SW STROBE UNIT CN901 CN912 VDDIO VDDIO VDDIO VDDIO SDIN0 SDIN0 SDIP0 SDIP0 SDIN1 SDIN1 SDIP1 SDIP1 SCKIN SCKIN SCKIP SCKIP TRANS SDIN2 SDIN2 SDIP2 SDIP2 TRIGGER CN302 SDIN3 SDIN3 SDIP3 SDIP3 AGND...

  • Page 38: Overall Circuit

    OVERALL CIRCUIT LENS UNIT CN141 SD CARD SOCKET CN951 CA1 BOARD CP1 BOARD SHUTTER IC951 VALID IC911 LENS DRIVER PWA BLOCK X1102 CMOS 24MHz 48.000MHz BLOCK IMAGE SENSOR LITIUM ION BATTERY IC501 POWER BATTERY TERMINAL SWITCHING CONROL POWER SUPPLY 720mAh 2.5inch IC305 STROBE...

  • Page 39: Image Sensor Circuit

    IMAGE SENSOR CIRCUIT LENS CIRCUIT IC951 IC101 CN951 CMOS_1.8 VDDIO VDDPLL VAA_2.8 VAAPIX VDD_SLVS_TX LENS_BLOCK LENS DRIVER SYSTEM ASIC BOOST5.3V VM[1:4], VCC ZOOM_VCC VDD3 IC952 OPVDD, ADVDD, DAVDD, DVDD33, ADVRH REG. (TO PWA) ZOOM_PI VDD1.8 DVDD25 VDDIO VDDPLL VAAPIX VDD_SLVS_TX Z_SENSE COMPD2 VDD_SLVS...

  • Page 40: Main Circuit

    MAIN CIRCUIT A_I2CSDATA A_I2CSCLK ADCK CN901 BOARD BtoB SDIP[0:3], SDIN[0:3], SCKIP, SCKIN XOUT CMOS_FLASH, CMOS_SHUTTER X1102 RESET_N 48.000MHz BLON PWA BLOCK PAON1, PAON2 SHUTTER+, PS POWER SUPPLY LENS_SCLK, LENS _SDI PON, PON2 IC951 LENS_RESETN, LENS_EN LENS LENS_SDO STATE1, STATE2 DRIVER FPIOUT, ZPIOUT CN951 LENS...

  • Page 41: Power Circuit

    POWER CIRCUIT STROBE CIRCUIT LOUTA[21, 22] CHARGING CIRCUIT L5002 LOUTB[21, 22] VDD3 STEP UP DOWN IC501 TO DMA, CAA, TCA CIRCUIT C5401 T5401 D5402 SWITCHING LOUT[31, 32] POWER FILTER CONTROL L5003 OSCILLATION RECTIFIER CN541 VDD1.2 C5412 STEP DOWN TRANSFORMER CIRCUIT TO DMA BLOCK UNREGST...

  • Page 42: System Control Circuit

    CIRCUIT DIAGRAMS SYSTEM CONTROL CIRCUIT CIRCUIT WAVEFORMS TEST POINT TEST POINT WAVEFORM WAVEFORM BOOST5.3V LOCATION ZCHGDONE LOCATION VDD2 ZCHGDONE TO DMA AL3.2V BACKUP3.2V VDD3 ST_CHG ST_CHG VDD1 IC101 IC101 IC302 BATTERY RESET IC305 PIN AE12 PIN AB25 BACKUP BATTERY REMAINING Q3002 VSS2 GAUGE...

  • Page 43: Cp1 Board (Dma) Main

    CP1 BOARD (DMA) MAIN D1-17700/SG318-U VOLTAGE: VIEW MODE, LCD ON VDD1.8 R8 IO4 SA12 DSA12 DQS3 R9 IO5 DQS3 R10 IO13 R11 DQ0 VSSd ZDSCS R12 NC ZRAS T1 NC /RAS DSA2 ZCAS T2 SA2 /CAS ONENAND_CLK T3 CLKo ZDSWE ONENAND_AVD DQM3 T4 AVDBo...
  • Page 44 CP1 BOARD (DMA) MAIN [UPPER-LEFT] D1-17700/SG318-U VOLTAGE: VIEW MODE, LCD ON C1004 0.1;B C1002 0.1;B C1003 C1063 0.1;B 0.1;B C1057 0.1;B C1064 0.1;B C1065 0.1;B C1054 0.1;B VDD3 VDD1.2 VDD1.8 CN103 AC11 AC12 AC19 AC18 AA16 AA15 AC10 AA10 VDD12 P11 VDD12 MIC_L+ MICL...
  • Page 45 CP1 BOARD (DMA) MAIN [UPPER-RIGHT] VDD1.8 DSA12 R8 IO4 SA12 DQS3 R9 IO5 DQS3 R10 IO13 R11 DQ0 VSSd ZDSCS R12 NC ZRAS T1 NC /RAS DSA2 ZCAS T2 SA2 /CAS ONENAND_CLK ZDSWE T3 CLKo ONENAND_AVD DQM3 T4 AVDBo DQM3 DQ24 T5 IO1 DQ24...
  • Page 46 IC101 AL3.2V B2 VSS ZCHGDONE ZCHGDONE ZCHGDONE C2 VSS DA11 ST_CHG ST_CHG R2 VSS FLCTL FLCTL T2 VSS DGATEI SW3.2V SW3.2V U2 VSS DGATEO BOOST5.3V BOOST5.3V V2 VSS DSRON BOOST5.3V CP1 BOARD (DMA) MAIN [LOWER-LEFT] EV3XA W2 VSS DCKE BOOST5.3V AC2 VSS DA12 AD2 VSS...
  • Page 47 IC101 DSA7 DSA11 DA11 DSA6 DGATE0 DGATEI DGATEO DSRON DSCKE CP1 BOARD (DMA) MAIN [LOWER-RIGHT] EV3XA DCKE DSA12 DA12 DSBA0 DBA0 ZDSWE ZDWE ZCAS ZCAS EV3XA------N ZRAS ZRAS DSBA1 DBA1 ZDSCS ZDCS DSA10 DA10 13.0X13.0 DSA0 DSA1 DSA2 DSA3 H=1.34 DQ15 DQ15 DQ14...

  • Page 48: Cp1 Board (Tca) Lens

    CP1 BOARD (TCA) LENS BOOST5.3V REG. IC952 XC6221S04XG QXC6221S04XGP VOUT TO PWA VDD3 VDD3 VDD3 CN951 ZOOM_A+ ZOOM_A+ ZOOM_B+ ZOOM_B+ ZOOM_A- ZOOM_A- VDD1.8 ZOOM_B- ZOOM_B- RB951 PILED ZOOM_LED R9505 ZPI_AD ZOOM_VCC 0;1/16Z Z_SENSE ZOOM_SENSE R9502 DRIVE- DRIVE- R9501 22;1/6F LENS_SCLK DRIVE+ DRIVE+ C4 MCLK...

  • Page 49: Cp1 Board (Sya) System Control

    CP1 BOARD (SYA) SYSTEM CONTROL BOOST5.3V BOOST5.3V AL3.2V AL3.2V TO PWA BACKUP3.2V UNREGSY ZBKUPCTL ZSREQ TO DMA MR_PANELTURN TO PWA 3.2V 2.4V 2.8V 3.3V BATTERY BACKUP TO DMA PLLEN R3002 SW3.2ON 330;1/16J Q3004 DTA114EM RB304 RB304 RB304 RB304 KEY_LEFT KEY_LEFT ZBAT_OFF KEY_DOWN_WIDE ZSREQ...

  • Page 50: Cp1 Board (Pwa) Power

    CP1 BOARD (PWA) POWER CL504 UNREG BATT+ F5001 2A32V UNREGST TO DMA TO BATTERY F47K2R0C3LFND 1608 CL505 BATT- F5003 F5002 2A32V 2A32V UNREG_A UNREGSY TO SYA F47K2R0C3LFND F47K2R0C3LFND 1608 1608 1AV4L2KN6R8NG LQH3NPN6R8NM0L LCDAN L5007 6.8;N H=1.5 3.0X3.0 UP03397 TO DMA Q5008 C5072 R5075...

  • Page 51: Cp1 Board (Caa) Sensor Power

    CP1 BOARD (CAA) SENSOR POWER CN901 VDDIO VDDIO C2-17700/SG318-U VDDIO SDIN0 SDIN0 SDIP0 SDIP0 SDIN1 SDIN1 SDIP1 SDIP1 SCKIN SCKIN SCKIP TO DMA SCKIP REG. REG. SDIN2 SDIN2 IC901 IC903 XC6221B082G TK70628HCL-G SDIP2 SDIP2 QXC6221B082GP VOUT VCONT CMOS1.8 VDD_SLVS_TX PAON2 VDD3 SDIN3 SDIN3...

  • Page 52: Ca1 Board Image Sensor

    CA1 BOARD IMAGE SENSOR CN912 VDDIO C1-17700/SG318-U VDDIO VDDIO VOLTAGE: VIEW MODE, LCD ON SDIN0 SDIN0 SDIP0 SDIP0 SDIN1 SDIN1 SDIP1 SDIP1 SCKIN SCKIN SCKIP SCKIP SDIN2 SDIN2 SDIP2 SDIP2 SDIN3 SDIN3 SDIP3 SDIP3 AGND VAA2.8 VAA2.8 VAA2.8 VAAPIX VAAPIX VAAPIX AGND SDIP3...

  • Page 53: Vf1 Board Lcd Connector & Mic

    VF1 BOARD LCD CONNECTOR & MIC CN172 CN171 VDD3 VDD3 LCDRESET GREST LCDD0 LCDD0 SHDB LCDD1 LCDD1 LCDEN SCEN LCDD2 LCDD2 LCDCK LCDD3 LCDD3 LCDSD LCDD4 LCDD4 LCDD7 DIN7 LCDD5 LCDD6 LCDD5 DIN6 LCDD6 LCDD5 LCDD6 DIN5 LCDD7 LCDD7 LCDD4 DIN4 LCDD3 DIN3...

  • Page 54: St1 Board Strobe

    ST1 BOARD STROBE STROBE UNIT CN541 TTRN-0530-026-T 1AV4L17B0560G AL3.2V FV02R80TP T5401 JW541 AWG28 AL3.2V D5402 AL3.2V PINK ZCHGDONE 2.2X1.5 TS-F45B-1 IC541 QTPS65560RGTJ 1AV4L17B0370N FLCTL TPS65560RGTR T5402 BLUE STROBE PGND CHARGE 100;1/16J BOOST5.3V PGND R5403 ST_GND C5410 BOOST5.3V 0.018;350B 3216 BOOST5.3V F_ON XFULL 5 6 7 8...

  • Page 55: Printed Wiring Boards (P.w.b.)

    PRINTED WIRING BOARDS (P.W.B.) CP1 P.W.B. (SIDE A) CP1 P.W.B. (SIDE B) C9513 R9502 R9501 C9505 C9504 C9515 R9516 R9513 Z3001 JW181 C9520 R9518 CL956 C9511 R9520 C9519 R9517 R9505 CL957 C9518 SIDE-A R9519 R9526 RB951 C9502 R9506 C9503 C9523 CN951 C9510 C9512...
  • Page 56 CA1 P.W.B. (SIDE A) CA1 P.W.B. (SIDE B) CL914 CL913 CL912 CL911 C9104 C9123 C9103 C9145 C9117 JW911 C9138 C9135 C9141 VF1 P.W.B. (SIDE A) VF1 P.W.B. (SIDE B) ST1 P.W.B. (SIDE A) ST1 P.W.B. (SIDE B) C1709 C1710 C1706 C1704 R1703 R1702...
  • Page 57 SANYO Electric Co., Ltd. Osaka, Japan Feb./’09...

This manual is also suitable for:

Vpc-ca9exbkVpc-ca9gxbkVpc-ca9rVpc-ca9exrVpc-ca9gxrVpc-ca9g ... Show all

Table of Contents