General Safety Instructions; Installation - Siemens CMTC1913 User Manual

General safety instructions

1 General safety instructions
1.1

Installation

4
Building Technologies
Fire Safety & Security Products
Read the general safety precautions before operating the device.
Keep this document for reference.
Always pass this document on together with the product.
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
Liability claim
Do not connect the device to the 230 V supply network if it is damaged or any
parts are missing.
Danger of electrical shock on the open device
The device may only be opened by trained service technicians.
The device is approved for use within the European Union. When used in
countries outside the European Union, the national or local requirements for
approval must be met before operating the device.
Damage due to unsuitable mounting location
Do not operate the device close to sources of powerful electromagnetic
radiation.
The device should only be used for indoor applications.
Protect the device against moisture.
Danger of electrical shock due to incorrect connection
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the rating label of the device.
Danger of electrical shock due to unsuitable power source
Use only the plug-in power supply unit that is included in the delivery.
Use the plug-in power supply only in conjunction with a power supply cable that
has been approved in your country and complies with the national standards.
CMTC1713_1913 User Manual
19/12/2008