Remote Functions; Power Management - Siemens CMTC1913 User Manual

7.3

Remote functions

7.4

Power management

Building Technologies
Fire Safety & Security Products
This monitor features a power management system to "power down" upon receipt
of a signal from a VESA DPMS-compliant video card.
Display Power Management Signaling (DPMS) is a VESA interface standard that
reduces power to computer monitors, when not in use. DPMS defines 4 power
management modes for monitors in idle state: Power On, Standby, Suspend and
Power Off.
Power consumption
Mode Power consumption
Power On < 50 W
Standby < 11 W
Suspend < 11 W
Power Off < 8.5 W
LED Indicator
Mode Color
Power On Green
Standby Red blinks
Suspend
Power Off Red
POWER: Turns the power ON or OFF
SOURCE: Selects input source (AV1, AV2, S-Video, DVI-D, DVI-
A)
APC (Auto Picture Control): Selects Picture mode [
ACC (Auto Color Control): Selects Color tone [
AV1: Selects AV1 input source
AV2: Selects AV2 input source
S-VIDEO: Selects S-VIDEO input source
PC: Selects DVI input source (DVI-A, DVI-D)
AUTO: Auto geometry adjustment (only in DVI mode)
MUTE : Mutes the sound
MENU: Enters and exits the OSD menu [
EXIT: Exits the OSD menu
VOL◀▶: Adjusts the level of audio volume
UP/DOWN: Moves upwards/downwards in the OSD menu
ENTER: Enters an OSD submenu or accepts your selection
INFO: Displays information about input source and picture mode
STILL: Pauses the picture
Monitor operation
Normal operation
Screen blanks after preset idle time and the monitor
shuts down
Not operation
Hardware Description
11]
11]
11]
CMTC1713_1913 User Manual
19/12/2008
9