Verify Command; Custom Mbean Commands; Service Command - Sun Microsystems GlassFish Enterprise Server 2.1 Administration Manual

Verify Command

The XML verifier command verifies the content of the domain.xml file.
TABLE C–22
Command
verify-domain-xml

Custom MBean Commands

The MBean commands allow you to manage and register custom MBeans. The commands are
supported in remote mode only.
TABLE C–23
Command
create-mbean
delete-mbean
list-mbeans

Service Command

The service command allows you to configure the starting of the Domain Administration
Server (DAS).
TABLE C–24
Command
create-service
Appendix C • The asadmin Utility

Verify Command

Definition
Verifies the content of the domain.xml file.

Custom MBean Commands

Definition
Creates and registers a custom MBean. If the target MBeanServer is not
running, the MBean is not registered.
Deletes a custom MBean. Ensure that the target MBeanServer is running.
Lists the custom mbeans for the specified target.

Service Command

Definition
Configures the starting of a DAS on an unattended boot. On Solaris 10, this
command uses the Service Management Facility (SMF). This is a local
command and must be run as the OS-level user with superuser privileges. It is
available only for Solaris 10. When the service is created, the user has to start,
enable, disable, delete, or stop the service. The DAS must be stored on a folder
to which the super-user has access. The configuration cannot be stored on a
network file system. The service is created such that it is controlled by the
OS-level user, who owns the folder where the configuration of the DAS
resides. To run this command, you must have solaris.smf.* authorization.
Service Command
251