Conforming Oses (As Of October In 2001); Checking The Usb Controller - Teac CD-W28PU User Manual

– Your PC must conform to a boot from the USB CD-ROM in order to
start from a bootable CD-ROM including a recovery CD using the
drive.
– It is recommended that you create a boot disk in advance taking
into consideration the re-installation (described in System Recov-
ery Procedure) of your OS.
– Refer to the TEAC homepage for the latest information on the op-
erational conformity.

1.2 Conforming OSes (as of October in 2001)

Any one of the following operating systems is required.
•
Microsoft ® Windows 98 Second Edition
•
®
Microsoft Windows Me
•
Microsoft ® Windows 2000 Professional
•
®
Microsoft Windows XP
•
The drive does not conform to Windows 95, Windows 98 and MS-
DOS.

1.3 Checking the USB controller

To use the CD-W28PU in your computer, the USB controller incorpo-
rated in the computer must be operating normally. Execute the follow-
ing steps to check the operation state of the USB controller.
In Windows 98SE or Windows Me
1. Click Start, Settings, Control Panel.
2. Double-click System.
In Windows Me, System may not appear in the Control Panel. In
that case, left-click Display all the Control Panel options to display
it.
1. Before Using 57