Replacing The Battery - IBM ThinkPad R50 Series Service And Troubleshooting Manual

Replacing the battery

1. Turn off the computer, or enter hibernation mode. Then disconnect the ac
adapter and all cables from the computer.
Note: If you are using a PC Card, the computer might not be able to enter
2. Close the computer display, and turn the computer over.
3. Slide and hold the battery latch to the unlocked position
the battery
4. Install a fully charged battery.
hibernation mode. If this happens, turn off the computer.
.

Replacing the battery

Chapter 2. Solving computer problems
, and remove
35