Table of Contents
Advertisement
Wireless
This tab sets the wireless parameters for the device.
<Entry Item>
Classifi-
Parameter
cation
WSL Scram-
WSL
(Original)
WSL Scram-
ble Key
Default Tx
WEP
Key 2 to 4
Extended
Roaming
Roaming
Exten-
Threshold
sion
Control
RSSI Sam-
Time (*2)
GN-1010 User's Manual — Functions of the Utility Software
Default
Value
Disabled
ble
0 to all
WEP
Disabled
Setting is
Key
not allowed.
(1)
Key 1
Setting is
not allowed.
(A1B2C3D4
E5
40 bits)
Disabled
Disabled
(*1)
Setting is
not allowed.
(*2)
(80)
Setting is
pling
not allowed.
(3 sec.)
This function is not supported.
Determines whether or not the WEP funciton is used.
Selects the WEP key number to use for data transmission.
1 to 4
•
Sets the WEP key for WEP encryption.
Hexadecimal value (0 to 9, A to F)
•
To perform communications using the WEP function, the
*
key placed in the default send key number used for trans-
mission must be the same as that placed in the same
location on the receiver.
Sets the AP roaming method.
Enabled/Disabled
•
When enabled, "AP Login Priority" setting is allowed.
*
Selects the threshold value to initiate roaming.
50 to 150
•
Roaming is performed when the average RSSI value dur-
*
ing the RSSI sampling time is less than this value.
Selects the sampling time (sec.) to obtain the RSSI value to
initiate roaming.
1 to 10
•
Description
29
Advertisement
Table of Contents
