Filter - Toshiba GN-1010 Operator's Manual

Filter

This tab performs the filter setting regarding MAC address and protocol.
<Operation Button>
<Display Item>
Classifi- Parameter
cation
Enable MAC
Address Fil-
MAC
Address
Filter
Address List
Enable Pro-
Protocol
Protocol List
Filter
(*1) : Applied only to "access point".
GN-1010 User's Manual — Functions of the Utility Software
[New] .................. Creates new list.
[Delete]............... Deletes the list previously set.
[Open] ................ Opens the saved list file.
[Save] ................. Saves created list.
Default
Value
Disabled
ter (*1)
MAC -
(*1)
Disabled
tocol
Filter
-
Determines whether or not the MAC address filter is used.
Enabled/Disabled
•
When enabled, connection to another AP other than the
*
clients which has the permitted MAC address is refused.
Displays the permitted MAC address list when "MAC
Address Filter" is enabled. You can register or delete MAC
address, one by one, by [New] or [Delete] command. You
can also load the batch list from the list file, and save a list
as the list file. Up to 1024 addresses can be registered.
Determines whether or not the protocol filter is used.
Enabled/Disabled
•
When enabled, transmission of the packet other than pro-
*
tocol is refused.
Displays the permitted protocol list when "Protocol Filter" is
enabled. You can register or delete protocol, one by one, by
[New] or [Delete] command. You can also load the batch list
from the list file, and save a list as the list file. Up to 256
protocols can be registered.
Operation
Button
Description
33