Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This manual explains the instructions for Bluetooth Module GN-2010. Read this manual before using your Multifunctional Digital Systems or Multifunctional Digital Color Systems. Keep this manual within easy reach, and use it to configure an environment that makes best use of the e-STUDIO’s functions.
Logo certification with Bluetooth wireless technology as defined by the Bluetooth Special Interest Group. Caution Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth™ products with all PCs and/or equipment using Bluetooth wireless technology.
Depending on environment, radio waves can not reach to the product. Approved Countries/Region for use for the Toshiba Bluetooth This equipment is approved to the radio standard by the specific countries/regions. Please ask Toshiba authorized dealer or service engineer.
Regulatory Information The TOSHIBA Bluetooth Adapter must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Notwithstanding the foregoing, the manufacturer is unable to accept any claims for losses or lost profits, etc. Resulting from the use of this product. TOSHIBA TEC will not guarantee the machine performance if you perform any setting other than specified in this manual.
SETTING UP BLUETOOTH This chapter describes the preparations before setting up the Bluetooth settings of the equipment. Enabling Bluetooth ........................ 10 Setting up Bluetooth HCRP Printing ..................13 Setting up Bluetooth BIP/OPP/FTP Printing ................ 14...
1 SETTING UP BLUETOOTH Enabling Bluetooth After installing the Bluetooth Module GN-2010 in your equipment, the BLUETOOTH SETTINGS screen will be available on the Touch Panel Display. You can use the BLUETOOTH SETTINGS screen to enable or disable the Bluetooth and configure the Bluetooth setting options.
1 SETTING UP BLUETOOTH 1.SETTING UP BLUETOOTH Press [Bluetooth SETTINGS]. The BLUETOOTH SETTINGS screen is displayed. Specify the following items and press [OK]. Bluetooth Select whether enabling or disabling Bluetooth. [Bluetooth NAME] Press this to enter the device name that is displayed as the Bluetooth device. As the default, “MFP” has already been set for the Bluetooth name.
1 SETTING UP BLUETOOTH Press [YES]. The Bluetooth settings apply after restarting the equipment. Enabling Bluetooth...
1 SETTING UP BLUETOOTH Setting up Bluetooth HCRP Printing When the Bluetooth is enabled, users can operate printing through the Bluetooth from Windows computers or Macintosh computers (Mac OS X 10.4.4 or later recommended) that have the Bluetooth module and have the capability for the HCRP connection.
OPP, FTP: JPEG, PDF, PS, PRN, TXT The device supports PRN file that is generated by a TOSHIBA printer. The device does not support some file format versions through the file formats listed above. Such file can not be printed.
2 APPENDIX Specification Item Description Standard Bluetooth version 1.1 compliant Frequency Band 2.4 GHz (2400 to 2483.5 GHz) Data Rate Max. 720 kbps (Asymmetric) Max. 430 kbps (Symmetric) Radio Modulation FHSS (Frequency Hopping Spread Spectrum) Aerial Power 1 mW/MHz or below (Power Class 3) Support Profile HCRP, BIP, OPP, FTP (Receive only) Bluetooth ON/OFF...