Staple Sort Mode - Toshiba e-STUDIO3510c Operator's Manual

4
Press the [ROTATE SORT] button.
Set other copy modes as required.
5
Press the [START] button.

Staple sort mode

When the Finisher (optional) is installed, automatic stapling is enabled. You can select the sta-
pling position from three types.
Special paper such as OHP films or sticker label cannot be used for stapling.
Copies in different size cannot be stapled. (When the lengths of the copies are the same,
they can be stapled even if their sizes are different.)
(Example of selecting the [FRONT STAPLE SORT] button)
1
Place paper in the drawer(s).
When using this mode in bypass copying, specify the paper size in advance. (
"Bypass Copying")
2
Place the original(s).
Selecting Finishing Modes
P.81
117