Rotate Sort Mode - Toshiba e-STUDIO3510c Operator's Manual

3 SETTING OF BASIC COPY MODES

Rotate sort mode

In the rotate sort mode, one set of copies is made to exit on another set of copies, being alter-
nated lengthwise or crosswise.
The available paper sizes for this mode is LT/LT-R. Set the LT/LT-R size paper in the drawers or
on the bypass tray in advance. Paper exits to the receiving tray in this mode.
This mode cannot be used with automatic paper selection.
The receiving tray loading capacity is approx. 550 sheets (28 lb. Bond), which may vary
depending on the condition of paper curl.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the finisher button on the basic menu.
116 Selecting Finishing Modes