Toshiba e-STUDIO3510c Operator's Manual page 322

9 BLINKING GRAPHIC SYMBOLS
When installing the Hole Punch Unit (optional: MJ-6101)
7
Open the cover of the Hole
Punch Unit.
8
Turn the knob counterclock-
wise to remove any misfed
paper.
9
Close the cover of the Hole
Punch Unit.
10
Close the cover of the Bridge Unit.
11
Close the upper tray.
Place both hands at the shaded area of
the upper tray, and then push and close
the upper tray until it locks.
320 Jam Symbols