Display Power Conditions - Tripp Lite SmartPro SMART1000RM2U Owner's Manual

Basic Operation
SCROLL Icon:
DISPLAY mode of the LCD once per two-second interval. If a button is pressed
while Scroll Mode is enabled, the scroll function will pause for 10 seconds to allow
the user to manually make menu selections before resuming scroll.
Automatic Voltage Regulation Icon:
high and that the AVR function is actively boosting or cutting the line. The AVR
icon is also used in conjunction with the EVENTS icon to indicate AVR events.
EXTERNAL BATTERY Icon (Select Models):
BATTERY SETTING CONTROL is active.
BATTERY CAPACITY Icon:

Display Power Conditions

Use the button to advance through power conditions.
1. Voltage In
5. Load Wattage*
* Load Wattage is displayed in watts up to "999" and then will be displayed in Kilowatts.
** The Kilowatt Hour usage per day reports daily power consumption of equipment connected to the UPS in KWH
in a 24-hour cycle. Press and hold the
Note: When the UPS is in Battery Mode (power is supplied to the output from the batteries), the BATTERY icon will be
lit in the display instead of the AC INPUT icon. The values displayed are random values used for example reference.
201205048 93-3149.indb 12
continued
When enabled, the display will automatically cycle through each
Used to better describe the battery capacity bar graph.
2. Voltage Out
6. KWH/Day**
button for 4 seconds to reset the accumulator to "0."
12
Indicates that the AC input is either low or
Displayed only when the EXTERNAL
3. Estimated Runtime
(in minutes)
7. Battery Capacity %
4. Load %
6/19/2012 11:33:40 AM