Installation - Tripp Lite PSCLAMP Owner's Manual

3. Installation

Before beginning installation, verify that all necessary package contents are present
and that the power strip to be mounted conforms to the standards necessitated by
its mounting location.
1
Secure clamps
end of the power strip
of the M4 screws provided.
Note: If attaching drip shield in next step,
mount power strip with power cord down
according to the diagram.
2
Depending on your application and
mounting location, you may wish to
attach the drip shield
clamp. Secure the drip shield using
one M4 screw. To ensure proper fit,
the top edge of the drip shield will
rest on top of the clamp.
Note: Attaching the drip shield is optional.
3
Attach the cord wraps
clamps using the provided M6
screws. Make sure that the arms
face away from the power strip.
201205001_M-93-3155.indb 3
loosely to each
A
using two
B
to the top
C
to the
D
B
1
C
2
D
3
3
A
5/4/2012 10:05:37 AM