Important Safety Instructions; Parts And Features - Tripp Lite PSCLAMP Owner's Manual

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the
installation of the product described in this manual. Read ALL instructions before
attempting to install this product. Failure to comply may invalidate any warranty
and cause serious property damage and/or personal injury.

2. Parts and Features

The PSCLAMP mounting kit includes:
• 2 Clamps
• 2 Cord Wraps
• 1 Drip Shield
• 5 Screws
• (3) M4 6 mm Pan Head Machine
Screws with Lockwashers for Power
Strip and Drip Shield
• (2) M6 12 mm Socket Head Cap
Screws for Cord Wraps
The PSCLAMP is designed to be used
with Tripp Lite's Medical-Grade Power
Strips. To accommodate a wide variety
of applications, the clamps include
small-tube adapters
to fit tubes from ¾" up to 2 ¼".
The clamps also include lock nuts
that can be tightened depending on
mounting location and equipment.
• For units meeting UL1363a
standards, the lock nuts MUST be
tightened and secure when mounting
on mobile cart, IV pole or other
certified usages.
Tripp Lite Models: PS-410-HGOEMCC,
PS-415-HG-OEM and
PS-615-HG-OEM.
• For units meeting UL 60601-1
standards, the lock nuts MAY be
tightened to user preference.
Tripp Lite Models: PS-415-HGULTRA
and SPS415HGULTRA.
201205001_M-93-3155.indb 2
that allow them
A
B
2
Clamps
Cord Wraps
M6 12 mm Socket Head
Cap Screws Machine Screws with
A
Drip Shield
M4 6 mm Pan Head
Lockwashers
B
5/4/2012 10:05:35 AM