11. When The "Press Select To Restart" Message Is Displayed, Press; Cancel/Del Key To Return To The Network Config Menu - Uniden UIP300G Administrator's Manual

7. Use to access the IP Address screen on the Network Config menu.
8. Press SELECT key to display the current IP address.
9. Press SELECT key again and enter the new IP address. The format of the IP
address is: XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the IP address.
The following IP addresses, 0.0.0.0 and 255.255.255.255, are not valid.
10. After the correct IP address is entered, press SELECT key.

11. When the "Press SELECT to Restart" message is displayed, press

CANCEL/DEL key to return to the Network Config menu.

The new IP address is not recognized until the telephone has been restarted.
When the telephone has been restarted, the LCD shows "Initializing...\". After
initialization is complete, the telephone returns to the time and date display.
12. Use the to access the Subnet Mask screen on the Network Config Menu.
13. Press SELECT key to display the current Subnet Mask address.
14. Press SELECT key again and enter the new Subnet Mask. The format of the
Subnet Mask is:
XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the Subnet Mask.
15. After the correct Subnet Mask is entered, press SELECT key.
17