Table of Contents
Advertisement
Select NAME RECORDING and press the OK/DIAL button. The LCD will
display the phonebook list. Select one phonebook entry, then press and hold the
OK/DIAL button. You will notice the icon VOICE flashing on the LCD, indicating
that the user can record the name. The user can record for around 3 seconds.
record Message
The Menu option RECORD MESSAGE is used to record user's own message
for an SOS call. The personal message will be played from the speakerphone
after the pre-recorded message 'This is an emergency call, to accept, press the
hash key on your telephone now', when emergency call is being made. Select
the option RECORD MESSAGE and press and hold the OK/DIAL button, the
icon 'VOICE' is seen flashing on the LCD, indicating that the user can record a
message for 15 seconds. Then the recorded message will be played back.
Check Message
With the menu option CHECK MESSAGE, the user can check whether the
emergency call message is a personal recorded message or pre-recorded
message. Select the option, CHECK MESSAGE and then press the OK/DIAL
button, the emergency message will be played back from the speakerphone.
While playing back the personal recorded message, if you want to delete the
personal recorded message, press the DEL button.
set Flash time
Select Menu option of SET FLASH TIME, and then press the OK/DIAL button
to enter flash time selection. The following flash time type of 100MS, 80MS,
600MS, 300MS 270MS can be selected. Default time is 600MS for Australia
and 100MS for New Zealand.
set Dial Mode
The telephone dial mode is set to TONE, by default. You need not change it if
not specially requested by PABX. Select Menu option of SET DIAL MODE, then
press OK/DIAL button to select between TONE or PULSE, then press OK/DIAL
to confirm.
pair a new pendant (emergency remote Dialler)
Use this Menu option to pair up to 5 Emergency Remote Diallers to the phone.
The Emergency Remote Dialler that comes with this phone has already been
paired to the phone. Select Menu option of PAIR NEW PENDANT, press OK/
DIAL, the LCD will display 'PAIRING', press OK/DIAL again, the word 'PAIRING'
flashes on the LCD to indicate the pairing mode. At the same time, user should
press the red SOS button of the new Emergency Remote Dialler. If the pairing is
successful, the LCD will display 'DONE'.
18
Advertisement
Table of Contents
