Inserting A Memory Stick Card - Dazzle 6 In 1 Reader User Manual

USER'S
USER'S
MANUAL
MANUAL

Inserting a Memory Stick Card

1.
Position the Memory Stick in the direction as shown in the illustration below. A portion of
the lower media slot was designed for insertion of Memory Stick media cards. This
portion utilizes the center of the media slot for Memory Stick insertion.
2.
Insert the Memory Stick into the slot with the gold contacts facing up. Gently push
the Memory Stick in all the way until the card is fixed in place.
IMPORTANT: Notice the rounded corner of the Memory Stick card and be careful not to insert
the Memory Stick in the wrong direction. To insert properly, be sure that the card is positioned
so that the rounded corner is in the upper right corner. You should see the gold contacts of the
Memory Stick when inserting it into the slot. When inserting properly, the gold contacts will be
visible and farthest from you as you look at it from the top. Please refer to the illustration below
for proper insertion.
WARNING: Insert the Memory Stick gently. If it is forced in, the card reader or the Memory
Stick may be damaged, or data on the card may be lost or corrupted. If excessive force is
required, or the card just doesn't seem to fit, do not attempt to force the card in the reader,
instead contact Dazzle Technical Support for assistance.
NOTE: The secure mode of Sony
MagicGate is not supported.
NOTE: If you intend on writing to or
deleting from your Memory Stick
media, make sure the Memory Stick
is not locked. The lock tab can be
found on the under side of the
Memory Stick.
29
Lock Tab
Position the card as shown in the
illustration on the left.
NOTE: The rounded corner should
LOCK
be located in the upper right corner
of the card when inserting.
Memory Stick portion of
media slot