Connecting To The Usb Port - Dazzle 6 In 1 Reader User Manual

USER'S
USER'S
MANUAL
MANUAL

Connecting to the USB Port

1.
Connect the USB connector of the Dazzle 6 In 1 Reader to the USB port of your
Macintosh computer.
NOTE: The USB cable may be connected to the computer while the computer is running
2.
Make sure the cable ends are firmly connected. Be careful not to confuse the upper
and lower parts of the connector. Do not force connections, as this may damage the
computer or the card reader.
In the illustrations below and on the next page, the Dazzle 6 In 1 Reader connects directly
to the USB port on your Macintosh. Your Dazzle card reader can also be connected to a
USB hub - see page 12 for more information.
10
Connect the USB plug of the Dazzle
6 In 1 Reader directly to the USB port
on your Macintosh.