Inserting A Memory Stick Card - Dazzle Zio! User Manual

Inserting a Memory Stick Card

Before you insert a Memory Stick card in the ZiO HS Reader/Writer, position the unit with
the Access Indicator on top, as shown below. Then flip its protective ring to the open
position to uncover the USB connector and the card slot and convert the ring to a stand,
as described in "Hardware Overview" on page
your Memory Stick card, make sure the card is not locked (see the illustration below).
MagicGate secure mode is not supported.
To insert a Memory Stick card, follow these steps:
1. Position the Memory Stick card in the direction shown in the illustration below.
2. Insert the Memory Stick card with the gold contacts facing down (you should not see
the gold contacts when inserting the card).
Caution: Notice the rounded corner of the Memory Stick card and be careful not to
insert the card in the wrong direction. To insert properly, be sure you position the card
with the rounded corner at the top left side.
3. Gently push the card all the way into the slot until it locks in place.
Important: If excessive force is required, or the card just doesn't seem to fit, do not
force the card in the ZiO HS Reader/Writer. Contact the Dazzle Technical Resource
Center for assistance.
Rounded corner
at top left side
Dazzle ZiO! Hi-Speed Portable Reader/Writer User's Guide • Using the Reader/Writer • Page 24
7. If you plan on writing to or deleting from
Access Indicator (on top)
Lock Tab
(located on
bottom of card)