Dazzle 6 In 1 Reader User Manual page 26

USER'S
USER'S
MANUAL
MANUAL
Inserting a SmartMedia Card (continued)
Insert the SmartMedia card as shown below. The Dazzle 6 In 1 Reader can only accept 3.3V
SmartMedia cards. Notice the notched corner of the SmartMedia card. The location of the notch
for a 3.3V SmartMedia card will appear on the right-hand side when you are looking directly at
the gold contacts from the top - refer to the illustration at the bottom of the page. Flip the card
over and be sure to insert the (3.3V) SmartMedia card with the gold contacts facing down
(therefore the notch will now be located on the left when the gold contacts are face down).
IMPORTANT NOTE: 5V SmartMedia cards are not supported with the Dazzle 6 In 1 Reader.
SmartMedia Card Comparison (view of cards from top)
Left notch
indicates 5V card
Gold contacts
Write protect area
26
5V SmartMedia cards 3.3V SmartMedia cards
(NOT COMPATIBLE) (COMPATIBLE)
Insert card into lower slot with the
notched corner inserted first and the
gold contacts face down.
Note: As shown on the left, you
should not see the gold contacts or
write protect area when inserting the
card into the Dazzle card reader.
Right notch
indicates 3.3V card
Gold contacts
Write protect area