Inserting A Memory Stick Card - Dazzle Digital Media High-Speed Reader/Writer User Manual

Inserting a Memory Stick Card

If you plan on writing to or deleting from your Memory Stick card, make sure the card is not
locked (see the illustration below).
To insert a Memory Stick Card, follow these steps:
1. Position the Memory Stick in the direction shown in the illustration below.
2. Insert the Memory Stick with the gold contacts first and facing to the right.
Important: Notice the rounded corner of the Memory Stick card and be careful not to
insert the card in the wrong direction. To insert properly, be sure the card is positioned
with the rounded corner on the bottom. You should see the gold contacts on the right
side when inserting the media into the slot.
3. Gently push the Memory Stick in all the way until the card locks in place.
Caution: Insert the Memory Stick gently. If it is forced in, the reader/writer or the
Memory Stick may be damaged, or data on the card may be lost or corrupted. If
excessive force is required, or the card just doesn't seem to fit, do not force the card
in the reader. Contact the Dazzle Technical Resource Center for assistance.
Note: The secure mode of Sony MagicGate is not supported.
Dazzle Digital Media HS Reader/Writer User's Guide • Using the Digital Media Reader/Writer • Page 22
Note: The card's
rounded corner must
be located at the bottom
when inserting.
Lock Tab
(located on
bottom of card)