Dazzle 6 In 1 Reader User Manual page 23

USER'S
USER'S
MANUAL
MANUAL
Connecting to a USB Hub
NOTE: When using a Microdrive concurrent with another media, the reader becomes a
high power device requiring direct connection to the host computer or self-powered hub.
1.
Connect the USB hub (purchased separately) to your computer's USB port.
2.
Then connect the USB connector of the card reader to a port on the USB hub.
NOTE: The USB cable may be connected to the computer or USB hub while the
computer is running.
IMPORTANT: Make sure the cable ends are firmly connected. Be careful not to
confuse the upper and lower parts of the connector. Do not force connections, as this
may damage the computer or the Dazzle card reader.
Enlarged view
Attach the USB connector from the
Dazzle 6 In 1 Reader to the USB port on the
23
USB hub
Enlarged view
Attach the USB connector from the USB hub
to the USB port on your computer