Vax Rapide Supreme V-023 Instruction Manual page 4

Vax V-023 D6 mm.qxd
Use & Function
3. Slide upper handle down onto unit. Insert the nut
into the recess in the back of the upper handle.
While holding the nut in place, insert the long
screw through the front of the upper handle and
tighten (Fig.3/3). Run the mains wire above the
upper cord hook and secure with the cord clip.
Fig.3/3
4. Align tool caddy with screw holes on mid-
section and base (Fig.3/4).
Fig.3/4
5. Place nut into recess on tool caddy and hold
into place (Fig.3/5). Press handle release with
other hand to tilt the mid-section backwards
(Fig.3/5A).
4
9/8/05 10:34 AM Page 4
Fig.3/5
6. Place screw through centre of lower mid-section
and tighten (Fig.3/6).
Fig.3/6
Hose & Tool Storage
1. Detach the upholstery hose adaptor from the end
of the hose and slide it onto the adaptor post
(Fig.3/7).
Fig.3/7
Fig.3/5A