Measuring Resistance - UNI-T UT205A Operating Manual

Model UT205A/206A: OPERATING MANUAL
D. Measuring Resistance (see figure 5)
Warning
To avoid damages to the Meter or to the devices
under test, disconnect circuit power and discharge
all the high-voltage capacitors before measuring
resistance.
To measure resistance, connect the Meter as follows:
Red Black
1. Insert the red test lead into the terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to .
3. Connect the test leads across with the object being
(figure 5)
measured.
The measured value shows on the display.
Note
The test leads can add 0.1 to 0.3 of error to resistance measurement.
21