Model UT205A/206A: OPERATING MANUAL
Measurement Operation
Make sure the Sleep Mode is not on if you found there
is no display on the LCD after turning on the Meter.
Make sure the Low Battery Display
otherwise false readings may be provided.
Pay extra attention to the
besides the input terminals of the Meter before carrying
out measeurement.
Make sure you are in the proper measurement range
before carrying out measurement.
A. AC Current Measurement (See figure 3)
Warning
The measurement value obtained is wrong if testing two or more current
conductors at the same time.
is not on;
symbol which is located
17
(figure 3)