Firmware Upgrade
One-Step Upgrade (available soon!)
1.
Acquire the one-step auto-execution file "upgrade.exe" from your distributor.
2.
Download the file and run it.
3.
You are done with the one-step upgrade.
Manual Upgrade
You may also manually upgrade your IP Share by performing the following steps:
1.
Connect the device to a computer that can configure the device using the GUI. Copy the
latest firmware to the directory where the setup.exe is located or to any desired location
on the hard driver (e.g. C:\IPS).
2.
Back to the management utility window, click on "File" from the Menu Bar, select "Find
Device" from the drop down menu. You will see a list of the IP Sharing Devices on the
screen. Select the one that you are going to update the firmware and click
Bar. The Upgrade Firmware window will appear.
3.
If you have copy the latest firmware to the directory where setup.exe is, click on "Default
File" and click "Start", the program will upgrade the firmware with the latest version of
firmware, (i.e. firmware.bin). If you copy the firmware file to a desired location, in the
Upgrade Firmware window, select "Specify File", enter the firmware file's path (e.g.
C:\WINDOWS\Desktop\firmware.bin), and then click "Start" to upgrade the firmware.
- 41 -
on the Tool